Electrode Paste price factory
Unit Price: | 500~700 USD |
---|---|
Min. Order: | 1 Ton |
Packaging: | Ton Bag or as customer's request. |
---|---|
Transportation: | Ocean |
Supply Ability: | 1000 Ton/Tons per Month |
Port: | Tianjin port /Dalian port/Qingdao port |
Product Description
Product Description
Carbon Electrode Paste is produced by putting Petroleum Coke and asphalt into melting tank to dehydration, melt, then adding them into kneading pot to kneading, molding and sintering.
Fully automated batching, crushing, mixing, kneading, molding, quality assurance, strict control of ash content, volatile, ensure low resistance and high strength.
Materials:Calcined Anthracite Coal,CPC,Anode Scrap,Coal pitch,Coal Tar,Graphite Powder.
Shape:Cylinder,Egg,Trapezoid.
Application:Used in soderburg furnace to make Various alloy, such as Ferro silicon, ferro manginess, ferro silicon manganese,nickel alloy, Chromium alloy.
Images:
Specification
Item | Electrode Paste | ||
si | <0.28% | FE | <0.25 |
P | 0.00 | ||
Ash content | 2-10% | Resistivity | 55-90 |
v,m | 10-15 | Density | >1.46g/cm3 |
compression strength | >18mpa | extensibility | 6-20 |
apparent density | >1.42g/cm3 | rupture density | >4.0 |
Characteristics
1. Lower ash content;
3. Good electric and thermal conductivity and the sintering speed apropriate to that of consumption of working end;
4. Smelting at lower temperature with certain fluidity and homogeneous composition;
5. High resistance to high temperature, oxidation and thermal shock, low resistivity and high mechanical strength after sintering.
Product Categories : Electrode Paste